Quick answer: this page sells Braun 73S replacement head
Order this compatible 73S-style cassette for newer Braun Series 7 360 Flex shavers. Choose a 1, 2, or 3 pack and add the 73S replacement head to your cart.
Key benefits
- Correct-fit focus: built for the 73S replacement head family.
- Quick install: snap-on replacement with no tools required.
- Comfort shave: fresh foils help reduce tugging and extra passes.
- Value packs: choose 1, 2, or 3 pack for your replacement cycle.
Braun 73S replacement head compatibility guide
Use this guide before ordering. If your current shaver head or product manual references 73S, this is the correct product family. If the head system does not match, check before purchasing.
| Fit question | Answer | Action |
|---|---|---|
| My shaver is a newer Series 7 360 Flex model. | Likely fits. This is the intended 73S-style use case. | Choose 73S on this page. |
| My current cassette says 73S. | Fits the same replacement-head family. | Choose the pack size you prefer. |
| My shaver is an older Series 7 such as many 790cc-style models. | Do not use 73S. Older Series 7 shavers usually use a different cassette style. | Compare Series 7 replacement heads before ordering. |
| I only know it says Series 7. | Check before buying. Series 7 has older and newer head systems. | Compare Series 7 replacement heads before ordering. |
Choose 73S if…
- Your shaver is a newer Braun Series 7 360 Flex model.
- Your current head or manual references 73S.
- The head pulls straight off in the newer EasyClick-style system.
Do not choose 73S if…
- Your current cassette is marked 70S.
- You own an older Series 7 Pulsonic or many 790cc-style shavers.
- The head shape and mounting system look different from your current cassette.
Why a 73S replacement head can improve your shave
A Braun 73S replacement head is the part to consider when a newer Series 7 360 Flex shaver starts pulling hair, missing short stubble, or requiring extra passes. Replacing the cassette restores the cutting surface and helps the shaver feel closer to new again.
The 73S-style cassette is made for newer Braun Series 7 shavers that use the 360 Flex or EasyClick-style head system. If your current head is dull, uneven, or no longer cutting efficiently, a fresh replacement head can help restore a closer shave without replacing the entire shaver.
Series 7 compatibility can be confusing because older and newer shavers use different head systems. This product is for the newer 73S family. Check the cassette marking or shaver manual before ordering if your current head does not clearly match 73S.
For best results, replace the shaver head when it starts pulling, feels rough, or requires extra passes over the same area. Many users replace the cassette every 12 to 18 months depending on beard thickness, shaving frequency, and cleaning habits.
How to replace the Braun 73S cassette
- Turn the shaver off and make sure it is dry enough to handle safely.
- Remove the worn head according to your shaver’s head-release design.
- Align the 73S-style head and press it into place until it sits firmly and evenly.
FAQ
No. 73S-style heads are for newer Series 7 360 Flex or EasyClick-style shavers. Older Series 7 designs use a different head system.
Yes, if your newer Series 7 shaver uses the 73S replacement-head family. If your current cassette uses another head family, check compatibility before ordering.
Replace it when the shaver pulls, misses hair, feels rough, or usually every 12 to 18 months depending on beard thickness and shaving frequency.
No. This is a compatible third-party replacement head designed to fit supported Braun Series 7 360 Flex shavers. Braun is a trademark of its respective owner. ShaversHead compatible replacement heads are not genuine Braun original parts unless specifically stated.
Check the current cassette marking first. If it is not marked 73S, use the fit guide or contact support before purchasing.
2 reviews for Braun 73S Replacement Head